HP StorageWorks ESL E-Series Tape Library users guide (350799-010, October 2007)

D Sense data values
This appendix lists sense data values and descriptions. These values appear in library error codes, as
well as in the library error log.
Table 21 lists message information that can be sent from the tape library to the host computer. The
table i s sorted by the data in the sense key column and lists the followi ng information:
• Sense Key
• Additional Sense Code (ASC )
• Additional Sense Code Qualifier (ASCQ)
• Message name, description, and (potential) recovery action
• Valid Interfaces
SCSI (host c omputer) DIAG (diagnostic port/computer) Both = SCSI and DIAG port
Table 22 lists message information for ha rdware failures ASCQ values. The table is sorted by the
ASCQ column and l ists the following information:
• ASCQ
• Message name, description and (potential) recovery action
Message name and description may contain abbreviations as follows:
• LU = Logical Unit
• REQ’D = Required
• DEV = Device
• DIAG = Diagnostics
• NVRAM = Nonvolatile RAM
• A/D = Analog-to-Digital
Table 21 Sense data values (hexadecimal)
Sense
key
ASC ASCQ
Message n
ame / description
00000
NO ADD ITIONAL SENSE INFORMATION
No recovery necessary.
2
04
00
LU IS NOT READY, CAUSE NOT REPORTABLE
Internal error. Retry comm and.
2
04
01
LO GICAL UNIT IN PROCESS OF BECOMING READY
Wait for library unit to complete initialization.
2
04
02
LOGICAL UNIT INIT REQUIRED
Element status or calib ration unknown.
• Run the Calibrate Cabinet Test from the OCP Diagnostics menu.
• Inventory the cabinet.
2
04
03
LU IS NOT READY, MANUAL INTERVENTION REQ’D
Initialization failed. Determine failure type by checking any previous
error code returned to host. Reinitialize element status through backup
package or command line interface.
28000
DOOR IS OPENED INVENTORY MAY HAVE BEEN CORRUPTED
Closedoorandretrycommand.Ifthesystemison-line,itexecutesits
initializa tion procedure.
HP StorageWorks
113