HP StorageWorks ESL E-Series Tape Library users guide (350799-010, October 2007)

Figure 64 Crating the library
1. Prepare the shipping pallet for the library by attaching the ramp to the pallet.
2. Place the library on the pallet
a. Raise the library support feet.
b. With the h elp of at least one person, roll the library to a position in front of the pallet ramp.
c. Roll the library onto the pallet.
3. Secure the l ibrary.
a. Use the four shipping bolts to secure the library to the pallet.
b. Place the shipping bag over the library, and secure it into place.
c. Remove the ramp from the pallet and lean it against the side of the library with a cardboard
sheet between the library and the ramp.
4. Place the accessory kits onto the pallet.
5. Place the foam cap over the library.
6. Wrap the cardboard crate around the library and fasten it using the plastic restraining clips.
7. Place the top onto the crate.
8. Secure the crate with two steel restraining bands.
HP StorageWorks
101