HP StorageWorks ESL E-Series Tape Library Unpacking and Installation Guide (350800-011, May 2010)
Table Of Contents
- HP StorageWorks ESL E-Series Tape Library
- 1 Unpacking the library
- 2 Installing the library
- 3 Loading tape cartridges
- 4 Configuring the library
- 5 Support and other resources
- Index
8. From the front of the library, remove two shipping restraints using a #2 Phillips screwdriver (see
Figure 17). The vertical axis shipping restraint is secured by four screws, and the robot shipping
restraint is secured by seven screws.
2. Vertical axis shipping restraint1. Robot shipping restraint
Figure 17 Removing the vertical axis and robot shipping restraints
.
Unpacking the library26