HP StorageWorks ESL E-Series e2400-FC 4G Interface Controller Replacement Instructions (December 2005)

ManualsBrandsHP ManualsStorageHP StorageWorks ESL 286e SDLT Tape Library

1

2

3

Verify that the status

LEDs on the new IC

indicate a normal state.

The power LED should

be lit. For any network

connection or

connection to an FC

drive, the corresponding

status LED should be

green.

Power

To network

To drives

Close the back door of the library.

12

13

11

Power on the library.

a. Verify that power cables are firmly in place.

b. Press the power button located behind the

laptop tray.

c. After several seconds, verify that the current

state of the library appears in the System

State display on the front panel (“System

On-line” or “System Off-line”).

Getting help

• HP product information:

http://welcome.hp.com/country/us/en/

prodserv/storage.html

• HP technical support and phone numbers:

http://www.hp.com/support

• HP StorageWorks Library and Tape Tools

(L&TT) diagnostic software:

http://www.hp.com/support/tapetools

• Interface Manager and HP StorageWorks

Command View TL:

http://www.hp.com/support/cvtl