HP StorageWorks ESL E-Series e2400-FC 2Gb Interface Controller Replacement Instructions (AA928-96015, September 2007)

© 2004-2007 Hewlett-Packard Development Company, L.P.
Third Edition (September 2007)
Part Number: AA928-96015
*AA928-96015*
AA928-96015
Configuration
16
Use the HP StorageWorks Interface Manager
command-line interface or the HP StorageWorks
Command View TL to verify detection of the new
controllers, and to perform configuration and
firmware updates, if necessary.
Refer to the HP StorageWorks Interface
Manager and Command View TL User Guide
for detailed procedures.
Getting help
• HP product information:
ht
tp://www.hp.com/go/storage
• HP technical support and phone numbers:
ht
tp://www.hp.com/support
• HP StorageWorks Library and Tape Tools
(L&TT) diagnostic software:
ht
tp://www.hp.com/support/tapetools
• Interface Manager and HP StorageWorks
Command View TL:
ht
tp://www.hp.com/support/cvtl
• HP manuals:
ht
tp://www.hp.com/support/manuals
Close the back door of the library.
15
Verify that the power LED and Fibre link LEDs on
the controller are solid green. The link LEDs
indicate a good connection.
LTO3
LTO4
14