HP StorageWorks ESL E-Series e2400-160 Interface Controller Upgrade (February 2004)

27
Flip the two breaker switches on (to the right) at
the power distribution unit.
28
Power on the library.
a. Verify that power cables are firmly in place.
b. Press the power button located behind the
laptop tray.
c. After several seconds, verify that the current
state of the library appears in the System
State display on the front panel (“System On-
line” or “System Off-line”).
Note: To change the state, press the
Standby button on the front panel.
This toggles the library between on-line
and off-line states.
Close the back door of the library.
29
Configuration
30
Refer to the HP StorageWorks Interface
Manager and Command View ESL User Guide
for detailed procedures on configuring the
controller.
Getting help
• HP product information:
http://www.hp.com/products/tapestorage
• HP technical support and phone numbers:
http://www.hp.com/support
• HP StorageWorks Library and Tape Tools
(L&TT) diagnostic software:
http://www.hp.com/support/tapetools
• Interface Manager and HP StorageWorks
Command View ESL:
http://www.hp.com/support/cvesl
© 2004 Hewlett-Packard Development Company, L.P.
First Edition (January 2004)
Part Number: 355699-001
*355699-001*
355699-001