HP StorageWorks e2400-FC 4G Interface Controller User and Service Guide (December 2005)

Introduction14
Features and specifications
• Fibre channel features
• Six FC ports (selectable between 4.25, 2.125, and 1.0625 GB/s)
• Fibre Channel arbitrated loop (FC-AL) and switched fabric (FC-SW) topologies
• Private loop direct attach (PLDA) profile compliant
• Class 3 operation with FCP protocol
• Supports FCP-2 error recovery protocol as specified in FCP-2 rev. 04 and 05 for use with
streaming devices (such as tape)
• Optical SFP support (Shortwave)
• Management features
• Out-of-band Ethernet TCP/IP management access
• DHCP for Interface Manager connection
• Support for Inband SCSI-3 commands
• Serial 3-pin connector for terminal access by HP support personnel only
• Field-updateable firmware
• SCC, indexed (default), and auto assigned addressing modes
• Physical specifications
• Fibre Channel link status and activity LEDs
• Ethernet link status and activity LEDs
•Power/Fault LED
• Operating environment specifications
•0 to 50°C
• 5 to 80% relative humidity (non-condensing)
• Non-operating environment specifications
• -40 to +55°C
• 0 to 92% relative humidity (non-condensing)