HP StorageWorks EVA Cluster 1.0 Release Notes (5697-0518, June 2010)

Prerequisites
A dual-fabric SAN as defined by the HP SAN Design Reference Guide (http://www.hp.com/go/
SANDesignGuide), See the HP Single Point of Connectivity Knowledge (SPOCK) website at http://
www.hp.com/storage/spock for supported switches and switch firmware. Site registration is required.
Installation instructions
Contact HP Support for installation and upgrades.
Compatibility/Interoperability
See http://www.hp.com/storage/spock for a listing of compatible products. Site registration is
required. If you do not already have an account, select Register to log in on the main page and follow
the instructions.
Determining current version
To determine the version of components for the HP StorageWorks SAN Virtualization Services Platform:
1. Log in to the HP StorageWorks Command View SVSP GUI.
2. Select the top-level domain node. The Domain window opens.
3. Select the Properties tab.
4. Select the About action button, and then click About SVSP. The About window opens and displays
the version of the SVSP appliance, SVSP SMI-S Providers, HP Command View SVSP, Back-end
LU Provisioning, and the Data Path Modules.
To determine the version of the HP Command View EVA software:
1. Log in to the HP Command View EVA GUI.
2. Click Help in the Session pane.
The version is displayed at the top of the online help window.
TIP:
The version is also shown at the bottom of the login screen.
4