HP StorageWorks Enterprise File Services WAN Accelerator 2.1.3 Release Notes (February 2006)

12
NOTE: The read-write community string must be different from the read-only community string for proper
functioning of the System Management Homepage.
Console messages
The following messages may appear on the console of the WAN Accelerator:
[blockpoll/smp/linux26_blockpoll.c:391] partition starts at xxxxx (in sectors)
and size is xxxxx KB
program cmaided is using a deprecated SCSI ioctl, please convert it to SG_IO
u32 classifier
Performance counters on
OLD policer on
input device check on
These messages are informational only, and can be safely ignored.
Synchronization with Standalone PFS shares
Synchronization with a Standalone PFS share may not work correctly. If using Standalone shares and
synchronization, verify that it is working properly, or choose a different type of PFS share when using
synchronization.
Setting the system date/time
When setting the system date/time in the web based GUI, if the date and time is significantly off, when set
to the current date and time, the GUI will log the user off. If this occurs, log back in, and the date will have
been set correctly, you can now set the time.
Refreshing web GUI pages
When configuring items through the web GUI, at times a browser error may be returned saying, “Page
not found.” When this occurs, press the Refresh button in the web browser, and the page often returns
correctly.
Documentation notes
HP StorageWorks Enterprise File Services WAN Accelerator Deployment Guide
Chapter 6: Policy-Based Routing Deployments:
The interface parameter was omitted from the ip in-path-gateway command.
For all instances of:
ip in-path-gateway <ip address>
replace with:
ip in-path-gateway inpath0_0 <ip address>
NOTE: This interface parameter (inpath0_0) is required for version 2.x.x. It is not required for version 1.2.
In sections describing how to configure the Cisco router
For all instances of:
ip address <ip address> 0.0.255.255
replace with: