HP StorageWorks Enterprise File Services Remote Copy Utility 2.1 Reference Guide (November 2005)

26 3 - THE HP EFS REMOTE COPY UTILITY COMMANDS
Parameters None
Example
>rcu /copy c:\data server1 newdata /allowabspath c:\data\private
Monitoring Actions
The following section describes the monitoring CLI commands. It contains the
following CLI commands:
 “/monitor,” next
 “/monitoridlewait” on page 26
 “/monitormaxwait” on page 26
/monitor
Description Waits for changes in the local directory, then performs the specified client actions.
Syntax /monitor <client_actions>
Parameters
Example
>rcu /monitor /monitoridlewait 10 /monitormaxwait 300 /mirror c:\build
server1 build1
/monitoridlewait
Description Specifies the maximum idle time before carrying out the specified client action. The
default value is 10.
Syntax /monitoridlewait <seconds>
Parameters
Example
>rcu /monitor /monitoridlewait 10 /monitormaxwait 300 /mirror c:\build
server1 build1
/monitormaxwait
Description Specifies the maximum time to wait, after a change on the client machine, before
performing the client action. The default value is 300.
<client_actions> Specifies the monitoring actions you want to
perform on the client machine.
<seconds> Specifies the maximum idle time before
performing the specified client action. The
default value is 10.