Maximizing Efficiency Through Data Replication Manager Data Movement Application Notes

Procedures and Examples
52 Application Notes - Maximizing Efficiency Through Data Replication Manager Data Movement
Example Display 55
LUN Uses Used by
------------------------------------------------------------------------------
D1 DISK10000 BUILDNGA\RCS1
LUN ID: 6000-1FE1-0000-1530-0009-9231-4229-009A
NOIDENTIFIER
Switches:
RUN NOWRITE_PROTECT READ_CACHE
READAHEAD_CACHE WRITEBACK_CACHE
MAX_READ_CACHED_TRANSFER_SIZE = 32
MAX_WRITE_CACHED_TRANSFER_SIZE = 32
Access:
HOST6A, HOST6B, BUILDNGBA, BUILDNGBB, BUILDNGBC, BUILDNGBD
State:
ONLINE to this controller
Not reserved
PREFERRED_PATH = THIS_CONTROLLER
Size: 17769177 blocks
Geometry (C/H/S): ( 5258 / 20 / 169 )
I 2. Issue this command to show the initial conditions of the remote copy sets:
SHOW REMOTE_COPY_SETS FULL
Example Display 56 shows a sample output of this command.
Example Display 56
Name Uses Used by
------------------------------------------------------------------------------
RCS1 remote copy D1
Reported LUN ID: 6000-1FE1-0000-1530-0009-9231-4229-009A
Switches:
OPERATION_MODE = SYNCHRONOUS
ERROR_MODE = NORMAL
FAILOVER_MODE = MANUAL
OUTSTANDING_IOS = 200
Initiator (BUILDNGA\D1) state:
ONLINE to this controller
Not reserved
Target state:
BUILDNGB\D1 is NORMAL
I 3. Issue this command to show the initial conditions of the controller:
SHOW THIS_CONTROLLER
Example Display 57 shows a sample output of this command.
Example Display 57
Controller:
HSG80 ZG92314229 Software YB09P-1, Hardware E06
NODE_ID = 5000-1FE1-0000-1530
ALLOCATION_CLASS = 0
SCSI_VERSION = SCSI-2
Configured for MULTIBUS_FAILOVER with ZG02704966
In dual-redundant configuration
Device Port SCSI address 7
Time: NOT SET
Command Console LUN is disabled