Maximizing Efficiency Through Data Replication Manager Data Movement Application Notes
Procedures and Examples
Application Notes - Maximizing Efficiency Through Data Replication Manager Data Movement 49
Example Display 51
%EVL--BUILDNGB Top-> --17-JAN-2001 01:47:16 (time not set)-- Instance Code: 0E010064
.
.
.
Instance Code: 0E010064
T 13. Verify that the LUN has finished normalizing by using the following command:
SHOW RemoteCopySetName
Example: show rcs1
Example Display 52 shows a sample display. Note that normalization is complete when the target
state is NORMAL.
Example Display 52
Name Uses Used by
------------------------------------------------------------------------------
RCS1 remote copy D1
.
.
.
Target state:
BUILDNGA\D10 is NORMAL
T 14. Delete the remote copy set. Refer to callout 8 on Figure 13. Use the command:
DELETE RemoteCopySetName
Example: delete rcs1
Example Display 53 shows a sample completion message. The instance code confirms the action
was completed.
Example Display 53
%EVL--BUILDNGB Top-> --17-JAN-2001 02:00:43 (time not set)-- Instance Code: 0E020064
.
.
.
Instance Code: 0E020064
I 15. From the initiator site, observe the characteristics of the initiator LUN. Use the command:
SHOW UnitName
Example: show d10
Example Display 54 shows a sample display.