Maximizing Efficiency Through Data Replication Manager Data Movement Application Notes

Procedures and Examples
Application Notes - Maximizing Efficiency Through Data Replication Manager Data Movement 47
I 7. From the initiator site, create a remote copy set to copy data to the new LUN on the target
subsystem (refer to callout 3 on Figure 13). Use the following command:
ADD REMOTE_COPY_SETS RemoteCopySetName InitiatorUnitName RemoteNodeName\TargetUnitName
Example: add remote_copy_sets rcs1 d1 BUILDNGB\d10
Example Display 48 shows a sample completion message. The instance code confirms the action
was completed.
Example Display 48
%EVL--BUILDNGA Top-> --23-JAN-2001 06:54:27 (time not set)-- Instance Code: 0E010064
Template: 144.(90)
Power On Time: 0. Years, 320. Days, 0. Hours, 53. Minutes, 26. Seconds
Controller Model: HSG80
Serial Number: ZG92314229 Hardware Version: E06(2E)
Software Version: YB09P-1(FE)
Informational Report
Target Controller Board Serial Number: " ZG82901711"
Initiator WWLID: 6000-1FE1-0000-1530-0009-9231-4229-009A
Initiator Node Name: "BUILDNGA"
Initiator Unit Number: 1.(00000001)
Target WWLID: 6000-1FE1-0008-D4E0-0001-8290-1711-06A1
Target Node Name: "BUILDNGB"
Target Unit Number: 1.(00000001)
Number of Targets: 1.(00000001)
Remote Copy Set Name: "RCS1"
Association Set Name: ""
Log Unit Number: Not Available
Instance Code: 0E010064
I 8. Verify the LUN has finished normalizing by issuing the following command:
SHOW RemoteCopySetName
Example: show rcs1
Example Display 49 shows a sample display of the SHOW command followed by a completion
message. Normalization is complete when the target state is NORMAL in the SHOW display, or
you receive the instance code on a completion message confirming normalization has occurred.
Example Display 49
Name Uses Used by
------------------------------------------------------------------------------
RCS1 remote copy D1
.
.
.
Target state:
BUILDNGB\D1 is NORMAL
%EVL--BUILDNGB>--18-JAN-2001 03:57:29 (time not set)-- Instance Code: 0E030064
.
.
.
Instance Code: 0E030064