Maximizing Efficiency Through Data Replication Manager Data Movement Application Notes
Procedures and Examples
38 Application Notes - Maximizing Efficiency Through Data Replication Manager Data Movement
Example Display 34
Name Uses Used by
------------------------------------------------------------------------------
RCS1 remote copy D1
Reported LUN ID: 6000-1FE1-0000-1530-0009-9231-4229-0095
Switches:
OPERATION_MODE = SYNCHRONOUS
ERROR_MODE = NORMAL
FAILOVER_MODE = MANUAL
OUTSTANDING_IOS = 200
Initiator (BUILDNGB\D1) state:
ONLINE to this controller
Not reserved
Target state:
BUILDNGA\D1 is NORMAL
RCS3 remote copy D3
Reported LUN ID: 6000-1FE1-0000-1530-0009-9231-4229-0093
Switches:
OPERATION_MODE = SYNCHRONOUS
ERROR_MODE = NORMAL
FAILOVER_MODE = MANUAL
OUTSTANDING_IOS = 200
Initiator (BUILDNGB\D3) state:
ONLINE to this controller
Not reserved
Target state:
BUILDNGA\D3 is NORMAL
I 12. On the initiator controller, delete only the migrated remote copy set (refer to callout 6 on
Figure 12). Issue the command:
DELETE RemoteCopySetName
Example: delete rcs1
Refer to Example Display 35 for a sample completion message for this command. The instance
code confirms the action was completed.
Example Display 35
%EVL--BUILDNGA Top-> --14-JAN-2001 07:18:26 (time not set)-- Instance Code: 0E020064
.
.
.
Instance Code: 0E020064
I 13. Delete the original initiator LUN from the previous RCS, then re-create the LUN using a larger
JBOD, stripeset, or RAIDset (refer to callout 7 on Figure 12). Issue the following commands:
DELETE UnitNumber
Example: delete d1
INITIALIZE ContainerName
Example: initialize disk60300
ADD UNIT UnitNumber ContainerName DISABLE_ACCESS_PATH=ALL
Example: add unit d1 disk60300 disable_access_path=all
SET UnitNumber ENABLE_ACCESS_PATH=HostIDs
Example: set d1 enable_access_path=BUILDNGBa,BUILDNGBb,BUILDNGBc,BUILDNGBd