Maximizing Efficiency Through Data Replication Manager Data Movement Application Notes

Procedures and Examples
28 Application Notes - Maximizing Efficiency Through Data Replication Manager Data Movement
I 14. Check that the newly merged remote copy set matches the initial parameters that existed in the
original remote copy set (step 2). Use the following command to make the comparison:
SHOW REMOTE_COPY_SETS FULL
Refer to Example Display 19 for a sample display output from the SHOW command.
Example Display 19
Name Uses Used by
------------------------------------------------------------------------------
RCS1 remote copy D1 AS1
Reported LUN ID: 6000-1FE1-0000-1530-0009-9231-4229-009A
Switches:
OPERATION_MODE = SYNCHRONOUS
ERROR_MODE = NORMAL
FAILOVER_MODE = MANUAL
OUTSTANDING_IOS = 200
Initiator (BUILDNGA\D1) state:
ONLINE to this controller
Not reserved
Target state:
BUILDNGB\D1 is NORMAL
RCS3 remote copy D3 AS1
Reported LUN ID: 6000-1FE1-0000-1530-0009-9231-4229-0093
Switches:
OPERATION_MODE = SYNCHRONOUS
ERROR_MODE = NORMAL
FAILOVER_MODE = MANUAL
OUTSTANDING_IOS = 200
Initiator (BUILDNGA\D3) state:
ONLINE to this controller
Not reserved
Target state:
BUILDNGB\D3 is NORMAL
The copy of data at the third site is now available for use. This completes the Disaster Tolerant Data
Movement to an Alternate Site example.