Maximizing Efficiency Through Data Replication Manager Data Movement Application Notes

Procedures and Examples
26 Application Notes - Maximizing Efficiency Through Data Replication Manager Data Movement
Example Display 15
%EVL--BUILDNGB Top-> --16-JAN-2001 07:23:10 (time not set)-- Instance Code: 0E020064
.
.
.
Instance Code: 0E020064
T 11. Delete the LUN (D10) that was created at the target site, and re-create and rename it as the original
LUN (D1). Refer to callout 5 on Figure 10). Use the following commands:
DELETE UnitNumber
Example: delete d10
ADD UNIT UnitNumber ContainerName DISABLE_ACCESS_PATH=ALL
Example: add unit d1 disk10000 disable_access_path=all
SET UnitNumber ENABLE_ACCESS_PATH=HostIDs
Example: set d1 enable_access_path=BUILDNGAa,BUILDNGAb,BUILDNGAc,BUILDNGAd
SET UnitNumber PREFERRED_PATH=THIS_CONTROLLER
Example: set d1 preferred_path=this_controller
SET UnitNumber MAXIMUM_CACHED_TRANSFER_SIZE=Number
Example: set d1 maximum_cached_transfer_size=128
SHOW UnitNumber
Example: show d1
Refer to Example Display 16 for a sample display output from the SHOW command.
Example Display 16
LUN Uses Used by
------------------------------------------------------------------------------
D1 DISK10000
LUN ID: 6000-1FE1-0008-D4E0-0001-8290-1711-0692
NOIDENTIFIER
Switches:
RUN NOWRITE_PROTECT READ_CACHE
READAHEAD_CACHE WRITEBACK_CACHE
MAX_READ_CACHED_TRANSFER_SIZE = 128
MAX_WRITE_CACHED_TRANSFER_SIZE = 128
Access:
BUILDNGAA, BUILDNGAB, BUILDNGAC, BUILDNGAD
State:
ONLINE to this controller
Not reserved
PREFERRED_PATH = THIS_CONTROLLER
Size: 17769177 blocks
Geometry (C/H/S): ( 5258 / 20 / 169 )