Features and Benefits of HSG80 ACS 8.6P Data Replication Manager

Features and Benefits of HSG80 ACS 8.6P Data Replication Manager 3
Introduction
Data Replication Manager (DRM) provides remote disk mirroring by connecting primary RAID
systems to remote storage RAID systems. In the event of a disaster at the primary site, a copy of
the data is safe on the remote storage system and available for immediate connection to an
alternate host.
Features of the DRM solution include:
Online and real-time sequential data replication to a local or remote site
Heterogeneous support of Compaq OpenVMS™, Compaq Tru64™, IBM AIX, Microsoft
Windows 2000, Microsoft Windows NT, Novell NetWare, and SUN Solaris on same fabric
or controller
Business continuance volumes
Cloning at initiator and target sites
Snapshot support at target site
Remote mirrors between both sites
Large SAN support
Up to 20 switches with cascaded switch supporting, for example, 8 storage arrays and
96 servers per site
Fibre Channel switch zoning support
Multiple Intersite Link technologies
Unlimited distance with Fibre Channel-to-ATM (Asynchronous Transfer Mode)
connectivity with line speeds of T1/E1 through OC3 using the Open Systems Gateway
(OSG)
Unlimited distance with Fibre Channel-to-IP connectivity by means of 10/100 Ethernet
with Gigabit Ethernet expected by the end of 2001
Up to 100 km (62 miles) with Wave Division Multiplexing (WDM)
Up to 100 km with Very Long Distance Gigabit Interface Converters (GBICs) or up to
10 km support with longwave GBICs
Support for both synchronous and asynchronous replication modes
Write history logging and mini-merge reconstruction
Cluster and stretched cluster high-availability solutions
Non disaster tolerant LUN support at initiator and target sites
Active/active bi-directional solutions
Dual and Single Switch and Single Fabric entry level configurations for development and
testing
Up to 12 remote storage sets per pair of arrays
Up to 12 local (non remote copy) storage sets per array