Data Replication Manager Windows-Based Server with Single Host Bus Adapter - Application Notes

Solution Behavior
10 Application Notes – Data Replication Manager Windows-Based Server with Single Host Bus Adapter
Reported PORT_ID = 5000-1FE1-0002-75A2
PORT_2_TOPOLOGY = FABRIC (connection down)
REMOTE_COPY = ATHENS
Cache:
256 megabyte write cache, version 0012
Cache is GOOD
No unflushed data in cache
CACHE_FLUSH_TIMER = DEFAULT (10 seconds)
Mirrored Cache:
256 megabyte write cache, version 0012
Cache is GOOD
No unflushed data in cache
Battery:
NOUPS
FULLY CHARGED
Expires: 25-MAR-2004
Athens_Top>
If one of the HSG80 controllers is still capable of communicating to its peer controller on the remote
site, replication of data to the remote site continues.
Failure of HSG80 at Local Site
If an HSG80 fails for any reason, all units fail over to the other surviving controller in the HSG80
controller pair. The surviving controller continues to serve the I/O requests from the host and continues
data replication to the other site.
Secure Path shows a failed controller, with all units failed over to the surviving controller, as shown in
Figure 6.
Figure 6: Secure Path display for failed controller at local site
When the failed controller is replaced with a functioning controller, the solution returns to the Normal
state.