Data Replication Manager HSG80 ACS Version 8.6-4P Release Notes

Platform-Specific Issues
22 Release Notes – Data Replication Manager HSG80 ACS Version 8.6-4P
4. Ensure the Media tab is highlighted and NSS Pools is displayed. Click the correct
NSS Pool from the list on the left to highlight the pool, and then click the Update
NDS button.
5. Click the Media tab and then NSS Logical Volumes.
6. Click the correct NSS Logical Volume from the list on the left to highlight the
volume, and then click the Update NDS button.
NOTE: You must perform steps 4-6 above for each NSS Pool/Volume pair you failover from the
initiator site.
Once the above procedures have been accomplished, they will not have to be
performed again as long as the volumes are always mounted on the same target file
server after a failover.
Upon failback to the initiator site, any new files or directories created at the target site
will need to have permissions reestablished using the ConsoleOne utility (for
Traditional NetWare volumes only). When performing subsequent failovers, it is not
necessary to insert the volumes into the NDS tree - they will already be there. Simply
make sure that the necessary permissions are granted using ConsoleOne if any new
files or directories have been created at the initiator site (for Traditional NetWare
volumes only).
CPU Hog Abends
If you experience CPU Hog Server Abends, you may have to adjust the CPU Hog
Timeout Amount (using MONITOR.NLM under the menu parameter Server
Parameters, Miscellaneous) to a lower amount or 0 seconds (disabled).
Auto Failback
Auto Failback is supported using Secure Path for NetWare. Failures involving the
target site (extended intersite link failures, target switch failures, target controller
failures) cause Secure Path to fail LUNs to their alternate paths. However, Auto
Failback to the preferred path may not occur after the link is restored. In these
situations, use the Secure Path Manager (GUI) to manually move LUNs back to their
preferred paths. Refer to the Compaq SANWorks Secure Path for Novell Netware
Installation and Reference Guide document for additional details on performing this
operation.