Compaq StorageWorks Data Replication Manager HSG80 ACS Version 8.5P Operations Guide

Configuring a Data Replication Manager Solution 4–47
To see information for all units configured to the controller, issue the following CLI
command:
SHOW UNITS FULL
You will see a display similar to the following for each unit:
D2 DISK10100 BuildngA\RC2
LUN ID: 6000-1FE1-0001-3AE0-0009-9141-6136-0045
NOIDENTIFIER
Switches:
RUN NOWRITE_PROTECT READ_CACHE
READAHEAD_CACHE WRITEBACK_CACHE
MAXIMUM_CACHED_TRANSFER_SIZE = 1
Access:
BuildngBA,BuildngBB,BuildngBC,BuildngBD,HOSTA1,HOSTA2
State:
ONLINE to this controller
Not reserved
PREFERRED_PATH = OTHER_CONTROLLER
Target NORMAL
Size: 17769177 blocks
Geometry (C/H/S): ( 5258 / 20 / 169 )
4. To see the connection name, operating system, controller, controller port, adapter ID
address, online or offline status, and unit offset, issue the following CLI command:
SHOW CONNECTIONS
You will see a display similar to the following for each connection:
Connection Unit
Name Operating system Controller Port Address Status
Offset
!NEWCON28 WINNT THIS 1 634000 OL this 0
HOST_ID=1000-0000-C921-4B5B ADAPTER_ID=1000-0000-C921-4B5B
5. Save this file for future reference. Repeat this procedure for the target.