Compaq StorageWorks Data Replication Manager HSG80 ACS Version 8.5P Operations Guide

4–44 Compaq StorageWorks Data Replication Manager HSG80 ACS Version 8.5P Operations Guide
2. Start a terminal emulator session. On Windows NT, use the HyperTerminal emulator.
Settings to be used are: 9600 baud, 8 bits, No parity, 1 stop bit, XON/XOFF.
3. Select Capture Text from the Transfer menu.
The Capture Text dialog box appears.
4. In the c:\field, type initiator.txt or target.txt.
5. Click START.
SHOW Commands
1. To see the full information on this controller, issue the following CLI command:
SHOW THIS_CONTROLLER FULL
You will see a display similar to that in Example Display 2.
Example Display 2
Controller:
HSG80 ZG91412410 Software S050P-0, Hardware E05
NODE_ID = 5000-1FE1-0001-3AE0
ALLOCATION_CLASS = 0
SCSI_VERSION = SCSI-2
Configured for MULTIBUS_FAILOVER with ZG91416136
In dual-redundant configuration
Device Port SCSI address 6
Time: NOT SET
Command Console LUN is lun 0 (NOIDENTIFIER)
Host PORT_1:
Reported PORT_ID = 5000-1FE1-0001-3AE1
PORT_1_TOPOLOGY = FABRIC (fabric up)
Address = 220113
Host PORT_2:
Reported PORT_ID = 5000-1FE1-0001-3AE2
PORT_2_TOPOLOGY = FABRIC (fabric up)
Address = 220313
REMOTE_COPY = BuildngA
Cache:
256 megabyte write cache, version 0012