Compaq StorageWorks Data Replication Manager HSG80 ACS Version 8.5P Operations Guide

Configuring a Data Replication Manager Solution 4–41
Rename the Host Connections
To better identify which hosts you are working with, Compaq recommends that you
rename the prompts that are reserved for the host names. You will need to change the
!NEWCON prompt to a meaningful host name. Each host-based adapter will appear as a
connection. An individual host-based adapter can be identified by its worldwide name that
you recorded in the Getting Started Chapter and appears in the connection description.
Figure 4–12 is a helpful worksheet to use when renaming your hosts. Fill in the fields
accordingly to keep an accurate record of connections and host names.
Figure 4–12. Host renaming worksheet
When you have completed the worksheet, rename the !NEWCONxx prompt using the
following CLI commands:
RENAME !NEWCONxx InitiatorHostConnectionNamex
RENAME !NEWCONxx InitiatorHostConnectionNamey
When you have finished renaming your host connections, enter the following command to
see your new settings:
SHOW CONNECTIONS
!NEWCONxx Worldwide Name Host Name Path Number