Compaq StorageWorks Data Replication Manager HSG80 ACS Version 8.5P Operations Guide

4–40 Compaq StorageWorks Data Replication Manager HSG80 ACS Version 8.5P Operations Guide

Figure 4–11. Data Replication Manager cabling at initiator and target sites

3. Verify that the connection between the host and the switch has been made by entering

this CLI command:

SHOW CONNECTIONS

NOTE: You can also verify that a connection has been made by looking for the illuminated green

LED that flashes on the switch ports.

You will see a display similar to the following:

Connection Unit

Name Operating system Controller Port Address Status Offset

!NEWCON00 WINNT THIS 1 210013 online 0