Compaq StorageWorks Data Replication Manager HSG80 ACS Version 8.5P Operations Guide

4–32 Compaq StorageWorks Data Replication Manager HSG80 ACS Version 8.5P Operations Guide

Figure 4–9. Cabling from the initiator site to the target site

Create Remote Copy Sets

Before You Start

Prior to creating the remote copy set, create the connections between the initiator and

target sites by typing the following CLI command:

ADD REMOTE RCS199 D199 TargetName\D199

Example: ADD REMOTE RCS199 D199 BuildngB\D199

NOTE: This command will fail, but creates and names the connections appropriately.

From the Target Site

1. Prior to creating the remote copy set, create the connections between the target and

initiator sites by typing the following CLI command:

ADD REMOTE RCS199 D199 InitiatorName\D199

Example: ADD REMOTE RCS199 D199 BuildngA\D199

NOTE: This command will fail, but creates and names the connections appropriately.

CXO7090A