Compaq StorageWorks Data Replication Manager HSG80 ACS Version 8.5P Operations Guide

4–16 Compaq StorageWorks Data Replication Manager HSG80 ACS Version 8.5P Operations Guide
Long Wave GBICs
1. Connect a single-mode, 9-micron fiber optic cable from port 6 of the top switch to one
connection point.
2. Connect another single-mode, 9-micron fiber optic cable from port 6 of the bottom
switch to the other connection point.
Other Transport Modes
Data Replication Manager uses other long distance transport modes. For connection
information, refer to our website at:
http://www.compaq.com/products/storageworks/
The target site is now physically linked to the initiator site. See Figure 4–4 for an
illustrated view of how this cabling should appear.
Figure 4–4. Cabling from the target site to the initiator site
CXO7087A
1
2
1
3