Compaq StorageWorks Data Replication Manager HSG80 ACS Version 8.5P Operations Guide

Getting Started 3–3
4. Telnet into the switch. Username = admin and password = password (default setting).
Make the following adjustments to the switch:
❏ Type switchName to configure the switch name. Be sure to designate a name that
will enable you to easily identify the switch that you are trying to access.
❏ Type switchShow to reveal the status of the switch and some of its ports.
❏ Type version to display the firmware levels. You must be running version 1.6B or
higher.
5. Using, a Java-capable browser, go to http://<FC switch DNS name> to view a visual
representation of the switch. You can double-click on this picture for further
information.
Setting Up the Fiber Optic Cables
Before you connect the fiber optic cables to your subsystems, it is important to understand
the designated names of each component. Figure 3–1 shows what each component will be
referred to in this document:
Figure 3–1. Component locations and names
CXO7096A
Port 1,
Controller A
Port 2,
Controller A
Port 1,
Controller B
Port 2,
Controller B
Top FC Switch
Bottom FC Switch
Redundant PDU