Compaq StorageWorks Data Replication Manager HSG80 ACS Version 8.5P Operations Guide

1–10 Compaq StorageWorks Data Replication Manager HSG80 ACS Version 8.5P Operations Guide
The agent is a companion program to the client. This host-resident program is an interface
between the client and the host’s storage subsystem that allows the two to communicate
over a network.
For a full description of SWCC and how it operates, refer to the StorageWorks Command
Console Getting Started Guide.
Required Hardware and Software
Table 1–1 is a checklist of equipment that is mandatory for operating a DT storage
subsystem with Data Replication Manager
Use the list to verify that you have everything, or you may not be able to configure your
system to replicate data in a DT subsystem.
Table 1–1 Hardware Requirements Checklist and Part Numbers
Required Hardware Part Number Quantity
(at each site)
ESA12000 380590–B21 (50 HZ, blue)
380590–B22 (50 HZ, opal)
380580–001 (60 HZ, blue)
380580–002 (60 HZ, opal)
Minimum of
1
Fibre channel gigabit switch
8-port
16-port
380591–B21 /
DS–DSGGA–AA
380578–B21 /
DS–DSGGA–AB
2
Host bus adapter 380574–001/ KGPSA–BC 2
(per system)
Fibre Channel host cables
5 meters
15 meters
30 meters
50 meters
234457–B22 / BNGBX–05
234457–B23 / BNGBX–15
234457–B24 / BNGBX–30
234457–B25 / BNGBX–50
2
Fibre Channel controller cables (2 meters) 234457–B21 /
DS–BNGBX–02
4
Short-wave Gigabit Interface Converters (GBICs) 380561–B21 /
DS–DXGGA–SA
6