Compaq StorageWorks Data Replication Manager HSG80 ACS Version 8.5P Operations Guide

1–8 Compaq StorageWorks Data Replication Manager HSG80 ACS Version 8.5P Operations Guide
Final Assembly
Your final DT setup should reflect Figure 1–4.
Figure 1–4. Fibre channel-based DT storage subsystem (with fully-redundant power)
NOTE: If you prefer to join cabinets for more storage capacity, follow the instructions in the
RA8000 and ESA12000 Storage Subsystems User’s Guide, and be sure to establish the same
setup at both the initiator and target sites. Keep in mind that an additional cabinet will not
include switches or controllers. It will, however, hold a PDU and be able to support redundant
power.
CXO6842A