Compaq StorageWorks Data Replication Manager HSG80 ACS Version 8.5P Operations Guide

5–24 Compaq StorageWorks Data Replication Manager HSG80 ACS Version 8.5P Operations Guide
New Hardware Failback Procedure
Use the New Hardware Failback Procedure when the initiator site is not intact and you are
working with all new hardware that is not configured.
Terminal Emulator Session
1. Use a laptop computer or another computer to connect a serial cable between the COM
port on that machine and the corresponding serial port on the HSG80 controllers.
2. Start a terminal emulator session that is capable of capturing text. Settings to be used
are: 9600 baud, 8 bits, No parity, 1 stop bit, XON/XOFF.
SHOW Commands
1. To see the full information on this controller, issue the following CLI command:
SHOW THIS_CONTROLLER FULL
You should see a display similar to that shown in Example Display 2.
Example Display 2
Controller:
HSG80 ZG91412410 Software V85P, Hardware E05
NODE_ID = nnnnnnnnnnnnn
ALLOCATION_CLASS = 0
SCSI_VERSION = SCSI-2
Configured for MULTIBUS_FAILOVER with ZG91416136
In dual-redundant configuration
Device Port SCSI address 6
Time: NOT SET
Command Console LUN is lun 0 (NOIDENTIFIER)
Host PORT_1:
Reported PORT_ID = 5000-1FE1-0001-3AE1
PORT_1_TOPOLOGY = FABRIC (fabric up)
Address = 220113
Host PORT_2:
Reported PORT_ID = 5000-1FE1-0001-3AE2
PORT_2_TOPOLOGY = FABRIC (fabric up)