Compaq StorageWorks Data Replication Manager HSG80 ACS Version 8.5P Operations Guide

Managing Site Failover and Failback Procedures 5–17
Extended information:
Terminal speed 9600 baud, eight bit, no parity, 1 stop bit
Operation control: 00000000 Security state code: 75184
Configuration backup disabled
2. To see the information for all association sets known to the controller pair, issue the
following CLI command:
SHOW ASSOCIATIONS FULL
You will see a display similar to the following for each association set:
Name Association Uses Used by
-----------------------------------------------------------------------
AS1 association RC1
RC2
RC3
Switches:
NOFAIL_ALL
NOORDER_ALL
NOLOG_UNIT
3. To see information for all remote copy sets known to the controller pair, issue the
following CLI command:
SHOW REMOTE_COPY FULL
You will see a display similar to the following for each remote copy set:
Name Uses Used by
-----------------------------------------------------------------------
RC1 remote copy D1 AS1
Reported LUN ID: nnnnnnnnnnnnnnn
Switches:
OPERATION_MODE = SYNCHRONOUS
ERROR_MODE = NORMAL
FAILOVER_MODE = MANUAL
OUTSTANDING_IOS = 60
.
.
.