958-000284-006, January 2006)

Figure 2 Mainte nance Feature Instal lation tab

7. Enter the feature key in the Feature Key box, and then click Update.

Aconﬁrm

ation page contains a warning that this action will override the current set of features on

the switch.

8. Click OK to activate the new featur e key.

The swit

ch performs an IPL when the key is activated and the feature key is installed.

NOTE:

When you

select OK, all current features are replaced with new features.

9. Back up the conﬁguration data when you are ﬁnished conﬁguring the switch.

Installing a feature key using HAFM

After o btaining the feature key, install the feature using HAFM as follows:

1. Log in to HAFM and access the Hardware View.

2. If your ﬁrmware is 04.01.02 or later, proceed to step 3.

If your ﬁ rmware is earlier than 04.01.02, Select Maintenance > Set Ofﬂine State to set the switch

ofﬂine.

The Hardware View is displayed.

3. Select Conﬁgure > Features.

The Conﬁgure Fe ature Key dialog box is displayed (Figure 3).

Flexport upgrade instructions