24 Service Manual (AA-RTDXC-TE, July 2004)

Diagnostics

94 Edge Switch 2/24 Service Manual

Is fault isolation being performed at the switch?

YES NO

↓ Fault isolation is being performed at the EWS interface or HAFM

appliance. Go to step 7.

Each port has an amber LED and a blue (2 Gb/s operation) or green (1 Gb/s

operation) LED adjacent to the port. The amber LED illuminates and the blue or

green LED extinguishes if the port fails.

Is an amber port LED illuminated but not blinking (beaconing)?

YES NO

↓ The switch appears operational, however a link incident or other

problem may have occurred. Perform fault isolation at the HAFM

appliance. Go to step 13.

Table 10: MAP 600 Event Codes

Event

Code

Explanation Action

080 Unauthorized worldwide name. Go to step 21.

081 Invalid attachment. Go to step 22.

506 Fibre Channel port failure. Go to step 6.

507 Loopback diagnostics port failure. Go to step 18.

512 SFP optical transceiver nonfatal error. Go to step 6.

514 SFP optical transceiver failure. Go to step 6.

581 Implicit incident. Go to step 34.

582 Bit error threshold exceeded. Go to step 34.

583 Loss of signal or loss of synchronization. Go to step 34.

584 Not operational primitive sequence received. Go to step 34.

585 Primitive sequence timeout. Go to step 34.

586 Invalid primitive sequence received for current link

state.

Go to step 34.