FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Edge Switch 2/24 Service Manual (AA-RTDXC-TE, July 2004)

Diagnostics
86 Edge Switch 2/24 Service Manual
3. Click Yes to delete the switch.
4. At the HAFM main window, click Discover > Setup. The Discover Setup
dialog box displays.
5. Click Add. The Domain Information dialog box displays with the IP Address
page open by default (Figure 23).
6. Type a switch description in the Description field.
7. Type the switch IP address (determined by the customer’s network
administrator) in the IP Address field.
8. Type the switch subnet mask (determined by the customer’s network
administrator) in the Subnet Mask field.
9. At the Data Source for Domain area of the dialog box, click the Use auto
detection, Use the server, or Use a specific RDC radio button (determined
by the customer’s network administrator).
10. Click OK to save the entered information, close the dialog box, and define the
new product configuration to HAFM.
11. Click OK to close the Discover Setup dialog box and return to HAFM.
At the HAFM master log, did the IP address associated with the switch change to
the new product configuration and did the Ethernet connection recover?
NO YES
↓ The switch-to-HAFM appliance connection is restored and appears
operational. Exit MAP.
Contact the next level of support. Exit MAP.