24 Service Manual (AA-RTDXC-TE, July 2004)

Diagnostics

84 Edge Switch 2/24 Service Manual

16. Disconnect the RS-232 null modem cable from the switch and the

maintenance terminal. Replace the protective cap over the maintenance port.

Continue to the next step.

Define the switch’s correct IP address (determined in step 24) to the HAFM

appliance.

1. From the HAFM main window, click Discover > Setup. The Discover Setup

dialog box displays (Figure 21).

Figure 21: Discover Setup dialog box

2. At the Available Addresses field, select (highlight) the switch to be

reconfigured and click Change. The Editing Domain Information dialog box

displays (Figure 22).

Figure 22: Editing Domain Information dialog box

3. Click Yes . The Domain Information dialog box displays with the IP Address

page open by default (Figure 23).