24 Service Manual (AA-RTDXC-TE, July 2004)

Diagnostics

81Edge Switch 2/24 Service Manual

■ Configure the HAFM appliance running the second instance of the application

as a client workstation.

Does the customer want the second HAFM appliance configured as a client?

YES NO

↓ Power off the HAFM appliance reporting the Duplicate Session

communication problem. Exit MAP.

Determine the internet protocol (IP) address of the HAFM appliance running the

first instance of HAFM.

1. After the HAFM appliance powers on and successfully completes POSTs, the

LCD panel displays a Welcome!! message, then continuously cycles

through and displays the following operational information:

—Host name.

— System date and time.

— LAN 1 and LAN 2 IP addresses.

— Fan rotational speed.

— CPU temperature.

— Hard disk capacity.

— Virtual and physical memory capacity.

2. After a few seconds, the LCD panel displays the following (Figure 20):

Figure 20: LCD panel (LAN 2 IP address)

3. Depending on switch-to-HAFM appliance LAN connectivity, record the

appropriate IP address (LAN 1 or LAN 2).

Continue to the next step.

LAN 2:

010.001.001.001