24 Service Manual (AA-RTDXC-TE, July 2004)

Diagnostics

71Edge Switch 2/24 Service Manual

Go to step 3.

Did the HAFM appliance crash and display a blue screen with the system dump

file in hexadecimal format (blue screen of death)?

YES NO

↓ The HAFM appliance appears operational. Exit MAP.

Attempt to clear the problem by power cycling the HAFM appliance.

1. At the HAFM appliance, press the power ( ) button on the LCD panel to

power off the HAFM appliance.

2. Wait approximately 30 seconds and press the power ( ) button to power on

the HAFM appliance and perform POSTs. During POSTs:

a. The green LCD panel illuminates.

b. The green HDD LED blinks momentarily, and processor speed and

random-access memory information display momentarily at the LCD

panel.

c. After a few seconds, the LCD panel displays the following message

pertaining to boot sequence selection (Figure 18):

Figure 18: LCD panel during boot sequence

d. Ignore the message. After ten seconds, the HAFM appliance performs the

boot sequence from BIOS. During the boot sequence, the HAFM

appliance performs additional POSTs and displays the following

operational information at the LCD panel:

—Host name.

— System date and time.

— LAN 1 and LAN 2 IP addresses.

— Fan rotational speed.

— CPU temperature.

— Hard disk capacity.

Boot from LAN?

Press <Enter>