24 Service Manual (AA-RTDXC-TE, July 2004)

Diagnostics

67Edge Switch 2/24 Service Manual

c. After a few seconds, the LCD panel displays the following message

pertaining to boot sequence selection (Figure 16):

Figure 16: LCD panel during boot sequence

d. Ignore the message. After ten seconds, the HAFM appliance performs the

boot sequence from the BIOS. During the boot sequence, the HAFM

appliance performs additional POSTs and displays the following

operational information at the LCD panel:

—Host name.

— System date and time.

— LAN 1 and LAN 2 IP addresses.

— Fan rotational speed.

— CPU temperature.

— Hard disk capacity.

— Virtual and physical memory capacity.

4. After successful POST completion, the LCD panel displays a Welcome!!

message, then continuously cycles through and displays HAFM appliance

operational information.

5. After rebooting the HAFM appliance at the LCD panel, log on to the HAFM

appliance Windows 2000 desktop through a LAN connection to a

browser-capable PC. Refer to the HP StorageWorks Edge Switch 2/24

Installation Guide for instructions on accessing the HAFM appliance desktop.

HAFM starts and the HAFM Login dialog box displays.

6. Type a user ID and password (obtained in “MAP 0000: Start MAP” on

page 32, and both are case sensitive), and click Login. HAFM opens and the

HAFM main window displays.

Did the main window display and does HAFM appear operational?

NO YES

↓ The problem is transient and the HAFM appliance appears

operational. Exit MAP.

Contact the next level of support. Exit MAP.

Boot from LAN?

Press <Enter>