24 Service Manual (AA-RTDXC-TE, July 2004)

Diagnostics

40 Edge Switch 2/24 Service Manual

c. After a few seconds, the LCD panel displays the following message

pertaining to boot sequence selection (Figure 8):

Figure 8: LCD panel during boot sequence

d. Ignore the message. After ten seconds, the HAFM appliance performs the

boot sequence from the basic input/output system (BIOS). During the

boot sequence, the HAFM appliance performs additional POSTs and

displays the following operational information at the LCD panel:

—Host name.

— System date and time.

— LAN 1 and LAN 2 IP addresses.

— Fan rotational speed.

— Central processing unit (CPU) temperature.

— Hard disk capacity.

— Virtual and physical memory capacity.

4. After successful POST completion, the LCD panel displays a Welcome!!

message, then continuously cycles through and displays HAFM appliance

operational information.

5. After rebooting the HAFM appliance at the LCD panel, log on to the HAFM

appliance Windows 2000 desktop through a LAN connection to a

browser-capable PC. Refer to the HP StorageWorks Edge Switch 2/24

Installation Guide for instructions on accessing the HAFM appliance desktop.

The HAFM 8 Login dialog box displays (Figure 9).

Boot from LAN?

Press <Enter>