24 Service Manual (AA-RTDXC-TE, July 2004)

Diagnostics

39Edge Switch 2/24 Service Manual

■ Not display an application warning or error message, or

■ Display a Dr. Watson for Windows 2000 dialog box?

NO YES

↓ An HAFM appliance application problem is indicated. Event codes

are not recorded. Go to “MAP 0300: Server Application Problem

Determination” on page 67. Exit MAP.

Did the HAFM appliance crash and display a blue screen with the system dump

file in hexadecimal format (blue screen of death)?

NO YES

↓ An HAFM appliance application problem is indicated. Event codes

are not recorded. Go to “MAP 0300: Server Application Problem

Determination” on page 67. Exit MAP.

Is the HAFM active?

NO YES

↓ Go to step 24.

Reboot the HAFM appliance.

1. At the Windows 2000 desktop, click Start at the left side of the task bar

(bottom of the desktop), then click Shut Down. The Shut Down Windows

dialog box displays

2. Click the Shut Down option from the list box and click OK. The HAFM

appliance powers down.

3. Wait approximately 30 seconds and press the power ( ) button on the liquid

crystal display (LCD) panel to power on the HAFM appliance and perform

power-on self-tests (POSTs). During POSTs:

a. The green LCD panel illuminates.

b. The green hard disk drive (HDD) LED blinks momentarily, and processor

speed and random-access memory information display momentarily at the

LCD panel.