24 Service Manual (AA-RTDXC-TE, July 2004)

Diagnostics

38 Edge Switch 2/24 Service Manual

2. At the Monitor panel, click the Log tab. The Monitor panel (Log tab)

displays (Figure 7).

Figure 7: Monitor Panel (Log Tab)

3. Record the event code, date, time, and severity (Informational, Minor,

Major, or Severe).

4. Record all event codes that may relate to the reported problem.

Were one or more event codes found?

NO YES

↓ Go to Table 4 to interpret event codes. Exit MAP.

Return to step 1 and perform fault isolation again. If this is the second time at this

step, contact the next level of support. Exit MAP.

Are you at the HAFM appliance?

YES NO

↓ Go to step 39.

Did the HAFM appliance lock up or crash and:

■ Display an application warning or error message, or