FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Edge Switch 2/24 Service Manual (AA-RTDXC-TE, July 2004)

Event Codes
259Edge Switch 2/24 Service Manual
Table 42: Event Code 073
Message: Fabric initialization error.
Severity: Informational.
Explanation: An error was detected during the fabric initialization sequence, most likely caused
by frame delivery errors. Event data is intended for engineering evaluation.
Action: Perform the data collection procedure and return the backup disk to
Hewlett-Packard support personnel.
Event Data: Byte 0 = error reason code for engineering evaluation.
Bytes 4–9 = port numbers for which problems were detected.
Distribution: Switch HAFM Appliance Host
EWS
Event
Log
System
Error
LED
Event
Log
E-Mail Call
Home
Sense
Info
Link
Incident
✔✔
Table 43: Event Code 074
Message: ILS frame delivery error threshold exceeded.
Severity: Informational.
Explanation: Fabric controller frame delivery errors exceeded an E_Port threshold and caused
fabric initialization problems (073 event code). Most fabric initialization problems
are caused by control frame delivery errors, as indicated by this code. Event data is
intended for engineering evaluation.
Action: Perform the data collection procedure and return the backup disk to
Hewlett-Packard support personnel.
Event Data: Byte 0 = E_Port number reporting the problem.
Byte 4–8 = Count of frame delivery timeouts.
Byte 9–11 = Count of frame delivery aborts.
Distribution: Switch HAFM Appliance Host
EWS
Event
Log
System
Error
LED
Event
Log
E-Mail Call
Home
Sense
Info
Link
Incident
✔✔