FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Edge Switch 2/24 Service Manual (AA-RTDXC-TE, July 2004)

Messages
245Edge Switch 2/24 Service Manual
The firmware version
already exists.
Firmware version
already exists in the
database.
N/A. An informational
message.
The HAFM appliance is
busy processing a
request from another
Element Manager
The HAFM appliance
could not process the
current request because
it is busy handling a
request from another
Element Manager.
Retry the operation later. If
the condition persists,
contact support personnel.
The link to the switch is
not available.
The link from the HAFM
appliance to the switch is
not available.
Check Ethernet connection.
The maximum number of
address configurations
has been reached.
The maximum number of
saved address
configurations has been
reached.
Delete configurations no
longer needed to allow
new configuration to be
saved.
The optical transceiver is
not installed.
No information
available for a port that
is not installed.
Ensure the optical
transceiver is installed and
fully seated.
The switch did not
respond in the time
allowed.
A time out was reached
waiting for the switch to
respond to the action.
Try action again.
The IPL configuration
cannot be deleted.
Deletion of the IPL
address configuration
was attempted and was
not allowed.
Cancel the operation.
This feature has not been
installed. Please contact
your sales
representative.
Indicator that the feature
has not been installed on
this switch.
Contact your sales
representative to obtain the
desired feature.
Table 30:
Edge Switch 2/24 Element Manager Messages (Continued)
Message Description Action