FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Edge Switch 2/24 Service Manual (AA-RTDXC-TE, July 2004)

Messages
243Edge Switch 2/24 Service Manual
R_A_TOV must be
greater than E_D_TOV.
R_A_TOV must be
greater than E_D_TOV.
Change one of the values
so that R_A_TOV is greater
than E_D_TOV.
Resource is unavailable. The specified operation
cannot be performed
because the product is
unavailable.
Verify that the HAFM
appliance-to-product link is
up. If the link is up, the
HAFM appliance may be
busy. Try the operation
again later.
SANtegrity Feature not
installed. Please contact
your sales
representative.
The user selected Switch
Binding from the
Configure menu, but the
optional SANtegrity
Binding feature is not
installed.
Install the SANtegrity key
through the Configure
Feature Key dialog box
before using Switch
Binding features.
Send firmware failed. Send firmware
operation has failed.
Retry the operation. If the
condition persists, contact
support personnel.
SNMP trap address not
defined.
An SNMP trap address
must be defined if a
community name is
defined.
Define an SNMP address.
Stop diagnostics failed.
The test is already
running.
Diagnostics for the port
was not running and the
Stop was selected on the
Port Diagnostics dialog
box. Diagnostics quit for
the port for some
reason, but the Stop
button remains enabled.
Verify port operation. Retry
diagnostics for port and
select Stop from the dialog
box. If problem persists,
contact your service
representative.
Stop diagnostics failed.
The test was not running.
The action to stop
diagnostics failed
because the test was not
running.
N/A. Informational
message.
Table 30:
Edge Switch 2/24 Element Manager Messages (Continued)
Message Description Action