FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Edge Switch 2/24 Service Manual (AA-RTDXC-TE, July 2004)

Messages
242 Edge Switch 2/24 Service Manual
Performing this action
will overwrite the
date/time on the switch.
Warning that occurs
when configuring the
date and time through
the Configure Date and
Time dialog box, that the
new time or date will
overwrite the existing
time or date set for the
switch.
Verify that you want to
overwrite the current date
or time.
Periodic Date/Time
synchronization must be
cleared before enabling
switch clock alert.
Action cannot be
performed because
Periodic Date/Time
Synchronization option
is active.
Click Periodic Date/Time
Synchronization check box
in Configure Date and
Time dialog box
(Configure menu) to clear
check mark and disable
periodic date/time
synchronization.
Port binding was
removed from attached
devices that are also
participating in Switch
Binding.
Informational message.
User has removed Port
Binding from attached
devices, but one or more
of these devices is still
controlled by Fabric
Binding.
Review the Switch Binding
Membership List to
determine if the devices
should be members.
Port cannot swap to
itself.
Port addresses entered
in the Swap Ports dialog
box are the same.
Make sure that address in
the first and second port
address fields are different.
Port diagnostics cannot
be performed on an
inactive port.
This displays when port
diagnostics is run on a
port in an inactive state.
Run the diagnostics on an
active port.
Port speeds cannot be
configured at a higher
rate than the
director/switch speed.
This displays when you
configure a port to 2
GB/sec and the switch
speed is set to 1 Gb/sec.
Set the port speed to 1
Gb/sec in the Configure
Operating Parameters
dialog box.
Element Manager error
<number>.
The switch Element
Manager encountered
an internal error and
cannot continue.
Report the problem to
support personnel.
Element Manager
instance is currently
open.
An Element Manager
window is currently
open.
N/A. Informational
message.
Table 30:
Edge Switch 2/24 Element Manager Messages (Continued)
Message Description Action