FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Edge Switch 2/24 Service Manual (AA-RTDXC-TE, July 2004)

Messages
239Edge Switch 2/24 Service Manual
Invalid port number.
Valid ports are (0–23).
Port number must be
within the range of ports
for the specific switch
model. For this model,
the valid port numbers
are 0–23.
Enter a port number within
the correct range.
Invalid port swap. Port swap selection is not
allowed.
Ensure that each port
selected for swap has not
been previously swapped.
Invalid response
received from switch.
The switch returned an
invalid response.
Resend the firmware. If the
condition persists, contact
support personnel.
Invalid serial number for
this feature key.
The serial number and
the feature key did not
match.
Ensure that the feature key
being installed is
specifically for this switch
serial number.
Invalid UDP port
number.
UDP port number must
be an integer from 1
through 65535.
Enter a port number from 1
through 65535.
Invalid value for
BB_Credit.
BB_Credit must be an
integer from 1 through
60.
Enter a number from 1
through 60.
Invalid value for day
(1–31).
Value for day must be
an integer from 1
through 31.
Enter a value from 1
through 31.
Invalid value for
E_D_TOV.
Value for E_D_TOV must
be an integer from 2
through 600, measured
in tenths of a second.
Enter a value from 2
through 600.
Invalid value for hour
(0–23).
Value for hour must be
an integer from 0
through 23.
Enter a value from 0
through 23.
Invalid value for minute
(0–59).
Value for minute must be
an integer from 0
through 59.
Enter a value from 0
through 59.
Invalid value for month
(1–12).
Value for month must be
an integer from 1
through 12.
Enter a value from 1
through 12.
Table 30:
Edge Switch 2/24 Element Manager Messages (Continued)
Message Description Action