FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Edge Switch 2/24 Service Manual (AA-RTDXC-TE, July 2004)

Messages
228 Edge Switch 2/24 Service Manual
You must define at least
one E-mail address.
At least one e-mail
address must be defined
and configured for e-mail
to be activated.
Define an e-mail address
at the Configure E-Mail
dialog box.
You must define at least
one remote network
address.
At least one IP address
for a remote workstation
must be configured for a
remote session to be
activated.
Define an IP address for at
least one remote
workstation at the Session
Options dialog box.
You must download the
HAFM client via the web
install.
An attempt was made to
download the
HAFM
application to a remote
workstation (client) using
an improper procedure.
Download a compatible
version of the
HAFM
application to the remote
workstation (client) using
the Web install procedure.
Zones configured with
port numbers are
ignored in Open Fabric
Mode.
While in Open Fabric
mode, zones configured
using port numbers are
enforced through
world-wide names.
Informational message
only–no action is required.
Zones must be defined
before creating a zone
set.
You cannot create a zone
set without any zones
defined for the HAFM.
Define zones using the
New Zone dialog box.
Zoning by port number
is not supported in Open
Fabric Mode.
You cannot specify an
item for zoning by port
number if the
HAFM
application is set to Open
Fabric Mode.
Either define zones by
device WWN or change to
Homogeneous Fabric 1.0
mode in the Configure
Operation Mode dialog
box of the
Element
Manager
application.
Zoning name already
exists.
Duplicate zone names
are not allowed in the
zoning library.
Modify (to make it unique)
or delete the duplicate
zone name.
Table 29: HAFM application messages (Continued)
Message Description Action