FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Edge Switch 2/24 Service Manual (AA-RTDXC-TE, July 2004)

Messages
224 Edge Switch 2/24 Service Manual
The Administrator user
cannot be deleted.
The Administrator user is
permanent and cannot
be deleted from the
Configure Users dialog
box.
Informational message
only-no action is required.
The Domain ID was not
accepted. The World
Wide Name and
Domain ID must be
unique in the Fabric
Membership List.
A user attempted to add
a Director or Edge Switch
to the fabric membership
list through the Fabric
Binding option
(SANtegrity Binding
feature), but a product
already exists in the
fabric with the same
domain ID.
Enter a unique domain ID
for the switch in the Add
Detached Switch dialog
box.
The HAFM appliance is
busy processing a
request from another
Element Manager.
The HAFM appliance is
processing a request
from another instance of
an
Element Manager
application, and cannot
perform the requested
operation.
Wait until the process
completes, then retry the
operation.
The link to the managed
product is not available.
The Ethernet connection
between the HAFM
appliance and managed
product is down or
unavailable.
Establish and verify the
network connection.
The maximum number
of members has already
been configured.
The maximum number of
zone members that can
be defined to the
application was reached.
Delete an existing zone
member before adding a
new zone member.
The maximum number
of nicknames has
already been
configured.
The maximum number of
nicknames that can be
defined to the
HAFM
application was reached.
Delete an existing
nickname before adding a
new nickname.
The maximum number
of open products has
already been reached.
The maximum number of
open products allowed
was reached.
Close an Element Manager
session (existing open
product) before opening a
new session.
Table 29: HAFM application messages (Continued)
Message Description Action