FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Edge Switch 2/24 Service Manual (AA-RTDXC-TE, July 2004)

Messages
222 Edge Switch 2/24 Service Manual
No Element Managers
installed.
No Director or Edge
Switch Element Manager
application is installed on
this workstation.
Install the appropriate
Element Manager to this
workstation.
No routing information
available.
No information is
available for the route
selected.
Select a different route and
retry the operation.
No user selected. A user was not selected
when the command was
attempted.
Select a user and retry the
operation.
No zone member
selected.
A zoning operation was
attempted without a zone
member selected.
Select a zone member and
retry the operation.
No zone selected. A zoning operation was
attempted without a zone
selected.
Select a zone and retry the
operation.
No zone selected or
zone no longer exists.
A zoning operation was
attempted without a zone
selected, or the zone
selected no longer exists
in the fabric.
Select a zone and retry the
operation.
No zone set active. A zone set cannot be
deactivated if there are
no active zones.
Informational message
only-no action is required.
No zone set selected. A zoning operation was
attempted without a zone
set selected.
Select a zone set and retry
the operation.
No zone set selected or
zone set no longer
exists.
A zoning operation was
attempted without a zone
set selected, or the zone
set you selected no
longer exists in the fabric.
Select a zone set and retry
the operation.
Only attached nodes
can be displayed in this
mode.
Users cannot display
unused ports when
adding ports by
world-wide name.
Change the add criteria to
Add by Port.
Table 29: HAFM application messages (Continued)
Message Description Action