FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Edge Switch 2/24 Service Manual (AA-RTDXC-TE, July 2004)

Messages
221Edge Switch 2/24 Service Manual
Invalid World-Wide
Name or nickname.
The specified world-wide
name format is invalid.
The valid format is eight
two-digit hexadecimal
numbers separated by
colons
(xx:xx:xx:xx:xx:xx:xx:xx).
Retry the operation using a
valid WWN or nickname.
Invalid World-Wide
Name. Valid WWN
format is
xx:xx:xx:xx:xx:xx:xx:xx.
The specified world-wide
name format is invalid.
The valid format is eight
two-digit hexadecimal
numbers separated by
colons
(xx:xx:xx:xx:xx:xx:xx:xx)
Retry the operation using a
valid WWN format.
Invalid zone in zone set. The defined zone no
longer exists and is
invalid.
Retry the operation using a
valid zone.
Limit exceeded. The user cannot add a
new product or user to
the
HAFM application if
the maximum number of
that resource exists on the
system.
Delete products or users
from the system before
attempting to add new
ones.
Management session is
already active from this
workstation.
An instance of the
HAFM
application is already
open at this workstation.
Close the previous session
of the HAFM application
before starting a new one.
No address selected. The user cannot complete
the operation because an
address has not been
selected.
Select an address and retry
the operation.
No attached nodes
selected.
An operation was
attempted without an
attached node selected.
Select an attached node
and retry the operation.
No HAFM appliance
specified.
An HAFM appliance is
not defined to the
HAFM
application.
At the HAFM 8 Log In
screen, type a server name
in the HAFM appliance
field and click Login.
No nickname selected. No nickname was
selected when the
command was
attempted.
Select a nickname and
retry the operation.
Table 29: HAFM application messages (Continued)
Message Description Action