FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Edge Switch 2/24 Service Manual (AA-RTDXC-TE, July 2004)
Messages
216 Edge Switch 2/24 Service Manual
Could not export log to
file.
A log file input/output
(I/O) error occurred and
the file could not be
saved to the specified
destination. The disk may
be full or write protected.
If the disk is full, use
another disk. If the disk is
write protected, change the
write-protect properties or
use another disk.
Default zoning is not
supported in Open
Fabric Mode.
A default zone cannot be
enabled when the
switches in a fabric are
set to Open Fabric mode.
Change the setting from
Open Fabric mode to
Homogeneous mode and
retry the default zoning
operation.
Device is not a member
of a zone in the active
zone set.
The selected device is not
a member of a zone in
the active zone set and
cannot communicate with
the other device in the
route.
Enable the default zone or
activate a zone set
containing the member
before attempting to show
the route.
Download complete.
Click OK and start the
HAFM.
Download of the
HAFM
and
Element Manager
applications is complete.
Start the
HAFM
application
to continue.
Duplicate community
names require identical
write authorizations.
If configuring two
communities with
identical names, they
must also have identical
write authorizations.
Verify that both
communities with the same
name have the same write
authorizations.
Duplicate Fabric Name. The specified fabric name
already exists.
Choose another name for
the fabric.
Duplicate name in
zoning configuration.
All zone and zone set
names must be unique.
Every name in the zoning
library must be unique.
Modify (to make it unique)
or delete the duplicate
name.
Duplicate nickname in
nickname configuration.
Duplicate nicknames
cannot be configured.
Modify the selected
nickname to make it
unique.
Duplicate World-Wide
Name in nickname
configuration.
A world-wide name can
be associated with only
one nickname.
Modify (to make it unique)
or delete the selected
world-wide name.
Duplicate zone in zone
set configuration.
More than one instance
of a zone is defined in a
zone set.
Delete one of the duplicate
zones from the zone set.
Table 29: HAFM application messages (Continued)
Message Description Action